Pole Saw NOBITA 270 6-Feet

POLE SAWS

Pole Saw NOBITA 6-Feet

A light-weight fixed-length aluminum pole saw with an oval cross-section. Constructed with aluminum, this is a lightweight yet durable beauty. Suitable for pruning high branches and the places where the gap between branches is small. The Nobita matches its lightweight aluminum pole system with the Gomtaro blade, one of the most popular handsaw blades. Ideal for orchards pruning.

Product Features

	6-feet fixed length model
	Maximum working reach 12 feet
	270mm (10.63 inch) length chrome plated blade with 8 teeth per 30mm (6.77 teeth per inch)
	Approximate weight 870g (1.92lb)
	A lightweight and rigid aluminum oval shaped pole
	Comes with its own full length, hard plastic scabbard
	Limited lifetime warranty against defects in material and workmanship

Product Specification

Product	Code No.	Blade Length, mm/inches	Teeth per 30mm/inch	Weight, g/lb
NOBITA 270 LARGE TEETH 6-FEET
SAW	235-27	270 / 10.63	8 / 6.77	870 / 1.92
BLADE	103-27	270 / 10.63	8 / 6.77

Product Applications
	Arborist	Pruning
	Fruit Tree Pruning	Lawn & Garden
Product Technology
	Non-set Teeth - Blades are made from SK-4 high carbon steel and taper ground i.e. thicker at the tooth edge, thinner at the back of the blade. This taper reduces resistance giving smoother, easier, faster cutting performance.
	Mirai-Me Smooth Cutting - The teeth of the future! Blades have precision ground, razor sharp teeth with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut.
	Impulse Hardening - Using a special high frequency heating technique, teeth are heated instantly and hardened. Because of this localized heating process only the teeth of the blade are heated and hardened. The remainder of the blade is unchanged and still retains its normal flexibility. The hardened teeth are harder than an ordinary file and stay sharp about three times longer than non-hardened teeth.
	Hard Chrome Plating - Hard chrome plating produces an exceedingly hard, durable surface. The blades are resistant to rust and the effects of resin. They are finely or mirror polished and wipe clean easily.
	Rubber Handle - Almost all Silky saws have rubber compound elastomer handles either inserted or vulcanized to ABS plastic or steel are comfortable to hold, reduce vibration and offer superior grip when hands are wet or cold and when wearing gloves.
	THE GOOD DESIGN AWARD G-Mark - Award by Japan Industrial Design Promotion Organization.