Excellent
for fine cuts in a variety of materials. Either 6” cuts thin
wood, plastics, and nonferrous metals - the teeth, which cut
on both pull and push strokes, have the same profile on all
three Mini-Mini saws. The "wood" and “plastic” versions have
about 20 teeth per inch, the "metal" version - about 36
teeth per inch. In a field testing, the metal version cut
through the barrel of a felt-tip marker in 8 strokes and
left a smooth surface behind. Great for DYI and professional
model makers.
Product Features
24 teeth
per 30mm (20 teeth per inch)
150mm
(5.9 inch) length blade
Approximate weight 120g (0.26lb)
Chrome
plated, taper ground blade
Electrical induction impulse hardened teeth
Low
effort triple edge, non-set tooth design
Non-slip
rubberized handle
Limited
lifetime warranty against defects in material and
workmanship
Product Specification
Product
Code No.
Blade Length, mm/inches
Teeth per 30mm/inch
Weight,
g/lb
MINI MINI2 150 for PLASTIC
SAW
164-15
150 / 5.9
24 / 20
120 / 0.26
BLADE
165-15
Product
Applications
DIY & Hobby
Product Technology
Impulse Hardening - Using a
special high frequency heating technique, teeth are heated
instantly and hardened. Because of this localized heating
process only the teeth of the blade are heated and hardened.
The remainder of the blade is unchanged and still retains
its normal flexibility. The hardened teeth are harder than
an ordinary file and stay sharp about three times longer
than non-hardened teeth.
Hard Chrome Plating -
Hard chrome plating produces an exceedingly hard, durable
surface. The blades are resistant to rust and the effects of
resin. They are finely or mirror polished and wipe clean
easily.
Rubber Handle - Almost
all Silky saws have rubber compound elastomer handles either
inserted or vulcanized to ABS plastic or steel are
comfortable to hold, reduce vibration and offer superior
grip when hands are wet or cold and when wearing gloves.
