RYOBA-type saw
for rip-cut and cross-cut. This new Silky saw series offers
more than a cosmetic difference from other Japanese saws.
Drawn-aluminum, rubber-gripped handles give these saws much
greater heft than the typical rattan-wrapped wood handles.
Replaceable blades are removed and reinstalled by simply
loosening a screw. All the advantages of Japanese saws
remain: fine kerfs thanks to the pull-cut teeth; precise,
controlled cutting; and durability from impulse hardening.
Kenzo saws are double-edged, one rip, one crosscut, and are
not taper-ground.
Rip-cut
Cross-cut
Product Features
14 teeth
per 30mm (11.85 teeth per inch)
270mm
(10.63 inch) length blade
Approximate weight 335g (0.74lb)
Chrome
plated, double edge, fixed blade
Low
effort, 4-Retsume (4 rows of teeth), set tooth
configuration
Electrical induction impulse hardened teeth
Non-Slip
rubberized handle
Easy
blade change mechanism
Superior
finish quality
Limited
lifetime warranty against defects in material and
workmanship
Product Specification
Product
Code No.
Blade Length, mm/inches
Teeth per 30mm/inch
Weight,
g/lb
KENZO 270 FINE TEETH
SAW
184-27
270 / 10.63
14 / 11.85
335 / 0.74
BLADE
185-27
Product
Applications
Woodworking
DIY & Hobby
Product Technology
Impulse Hardening - Using a
special high frequency heating technique, teeth are heated
instantly and hardened. Because of this localized heating
process only the teeth of the blade are heated and hardened.
The remainder of the blade is unchanged and still retains
its normal flexibility. The hardened teeth are harder than
an ordinary file and stay sharp about three times longer
than non-hardened teeth.
Hard Chrome Plating -
Hard chrome plating produces an exceedingly hard, durable
surface. The blades are resistant to rust and the effects of
resin. They are finely or mirror polished and wipe clean
easily.
Rubber Handle - Almost
all Silky saws have rubber compound elastomer handles either
inserted or vulcanized to ABS plastic or steel are
comfortable to hold, reduce vibration and offer superior
grip when hands are wet or cold and when wearing gloves.
Four Rows of Teeth -
Teeth are set in such a way that there appears to be 4 rows
of them. These are rough cutting hand saws for heavier
tasks. They can rip-cut, cross-cut and slant-cut.
THE GOOD DESIGN AWARD G-Mark - Award by
Japan Industrial Design Promotion Organization.
